Rear Webcam Module And Lens - HP x2 Detachable 10-p0XX Maintenance And Service Manual

Rear webcam module and lens

Description
Rear webcam module (includes bracket)
Before removing the rear webcam module, follow these steps:
1. Turn off the tablet. If you are unsure whether the tablet is off or in Hibernation, turn the tablet on, and
then shut it down through the operating system.
2. Disconnect the power from the tablet by unplugging the power cord from the tablet.
3. Disconnect all external devices from the tablet.
4. Remove the back cover (see
5. Remove the LCD shield (see
6. Remove the left speaker (see
Remove the rear webcam module:
1. Lift the bracket from atop the webcam module (1).
2. Disconnect the webcam cable from the system board (2).
3. Remove the webcam module (3) from the display panel assembly.
4. Remove the rear webcam module and cable.
NOTE:
36 Chapter 5 Removal and replacement procedures
Back cover on page
LCD shield on page
Speakers on page
You have to clean the lens when replacing the rear webcam.
22).
28).
30).
Spare part number
902256-001