Turning On And Off; Switching To Standby Mode - Miracle-Ear MEENERGY B P 5 User Manual

Low power indication
You will hear an alert signal to indicate the power cell
is running low. The signal will be repeated every
20 minutes. Depending on the usage of your hearing
aids, you have approximately 1.5 hours to charge your
hearing aids before they stop working.
Note that the power cell runtime is reduced if too many
features are used simultaneously.

Turning on and off

You have the following options to turn your hearing
aids on or off.
Via charger:
Turning on: Take the hearing aids out of the charger.
X
The startup melody is played in your hearing aids.
The default volume and hearing program are set.
Turning off: Place the hearing aids in the charger.
X
Note that the charger must be connected to the power
supply. For details refer to the charger's user manual.
12
Via rocker switch:
Turning on: Press and hold the
X
lower part of the rocker switch until
the startup melody starts to play.
Release the rocker switch while the
melody is playing.
The default volume and hearing
program are set.
Turning off: Press and hold upper
X
or lower part of the rocker switch
for several seconds. A power down
melody is played.
See also the tips for charging in the charger's user
manual.

Switching to standby mode

Via remote control or the Miracle-Ear
switch your hearing aids to standby mode. This mutes
the hearing aids. When you leave standby mode, the
previously used volume and hearing program are set.
Note:
●
In standby mode, the hearing aids are not turned off
completely. They draw some power.
Therefore we recommend to use standby mode
only for a short period of time.
App, you can
®
13