3.5.10 Connecting the Footswitch
The Footswitch should be directly connected to any accessible USB-port on the Voluson E-Series (e.g., on
rear of the system).
Connection is always the same (no differences between PC-Motherboard version of the Voluson E-Series
Note
system).
After physical connection, adjust the Footswitch as described in
Voluson E-Series Service Manual
5539550APB Revision 6
Figure 3-23 Connection Scheme - Footswitch
Setup Instructions
Section 3.7.1.8 on page 3-45
.
3-31