Backup And Restore Database, Preset Configurations And Images - GE Voluson E Series Service Manual

Functional Checks

4.4 Backup and Restore Database, Preset Configurations and Images

It is highly recommended to Backup the Full System Configuration
Note
Image Archive
1. Press the Utilities key on the control console.
2. In the "Utilities" menu touch the
3. On the right side of the screen select
1 Full System Configuration
2 Small Backup (Scan Settings)
The System Configuration page is subdivided in 2 main groups:
1. Small Backup (Scan Settings)
-
"Save Small Backup (Scan Settings)" on page 4-11
-
"Load Small Backup (Scan Settings)" on page 4-12
2. Full System Configuration
-
"Save Full System Configuration (Full Backup)" on page 4-15
-
"Load Full System Configuration (Full Backup)" on page 4-17
-
"Delete Full System Configuration (Full Backup)" on page 4-19
Settings and/or Full System Configuration can be saved to the following destinations:
•
D: partition of internal hard disk
•
DVD/CD+R/RW
•
Mapped Network Drive, see:
•
Any other drive connected to the system (e.g.; USB-Stick or external hard disk drive)
Note: This function is only available in the Full Backup utility. For further details review:
"General Remarks when using external USB-Devices" on page 3-35
4-10
(Section 4.4.6 on page 4-20
Setup button to invoke the setup desktop on the screen.
Figure 4-9 Setup - Backup - SYSTEM CONFIGURATION page
Section 3.13.7 on page 3-69
(Section 4.4.3 on page 4-15
) once a week.
Backup and then click the System Configuration tab.
.
) and the
Section 3.5.15
.
Voluson E-Series Service Manual
5539550APB Revision 6