Required Equipments; General Procedure - GE Voluson E Series Service Manual

Functional Checks

4.1 Required Equipments

•
An empty (blank) DVD/CD+R/RW and/or external USB device (stick or hard disk drive).
•
At least one probe; see
check all the probes used on the system

4.2 General Procedure

Caution
The system requires all covers. Do not operate the Voluson E-Series system unless all board covers and
frame panels are securely in place. The covers are required for safe operation, good system performance
and cooling purposes. When covers are removed, EMI may be present.
Lockout/Tagout Requirements (For USA only).
Follow OSHA Lockout/Tagout requirements by ensuring you are in total control of the Power
Cable on the system.
4-2
Section 9.12 "Probes" on page 9-49
for an overview. Usually you should
Voluson E-Series Service Manual
5539550APB Revision 6