Network Configuration - GE Voluson E Series Service Manual

3.12.1.3 Stand-alone Voluson E-Series
If digital images or 3D/4D data sets are stored, they should be saved in the Archive (Image Management
System software).
Note For further details refer to the Voluson E-Series Basic User Manual.
To avoid loss of essential data, it is highly recommended to export/backup patient data as well as
Note
measurements at least once a month.
Physical Connection:
No network connection needed.
3.12.1.4 Voluson E-Series + PC (with 4D View Software) within a "Sneaker Net"
A PC (one or several with 4D View software installed) is used for review and work on studies acquired on
one or more Voluson E-Series system without being connected in a network.
The images are first stored on the Voluson E-Series system's hard drive (Archive) and then exported from
the system's hard drive to a sneaker device (e.g., DVD/CD), and finally imported from the sneaker device to
the "4D View" PC's internal hard drive.
For further details refer to the Voluson E-Series Basic User Manual.
Note
To avoid loss of essential data, it is highly recommended to export/backup patient data as well as
Note
measurements at least once a month.
Physical Connection:
No network connection needed.
3.12.1.5 Connection between Voluson E-Series and DICOM Server
In this configuration, the Voluson E-Series is configured to work with a DICOM server in a network
environment. Usually, this will be the hospital network. Images are first saved on the local image buffer on
the system. At the end of the examination, the images are sent to the DICOM server via a DICOM spooler.
This scenario requires that the system is configured to be connected to the DICOM server.
Physical Connection:
You will need one network cable.
1. Connect one end of the cable to the Ethernet connector on the Voluson E-Series.
2. Connect the other end of the cable to the wall outlet.
If a Peer-to-Peer Network is connected to the hospital's network, you may connect the Voluson E-Series to
Note
the Peer-to-Peer Network.
For further details refer to the Voluson E-Series Basic User Manual.
Note

3.13 Network Configuration

Content in this section
3.13.1 TCP/IP Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-58
3.13.2 Wireless Network Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-59
3.13.3 How to Setup the Cellular Modem - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-64
3.13.4 How to Setup E-mail - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-66
3.13.5 How to Setup E-mail to MMS Service - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-67
3.13.6 How to enter Patient's Email address and Phone number in the PID screen - - - - 3-68
3.13.7 Map Network Drive - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-69
3.13.8 InSite Configuration - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - 3-70
Voluson E-Series Service Manual
5539550APB Revision 6
Setup Instructions
3-57