Installation; Description Of The Device; Installation Recommendations; Packaging - Immergas SUPER TRIO Instruction Booklet

I
1
NSTALLATION

1.1 DESCRIPTION OF THE DEVICE.

The Super Trio package, described below, allows the installation in
special frames (recessed called "Container Super Trio" or external
to the wall called "Domus Container Super Trio" both excluded
from this supply) of a hydronic unit designed for combination with
Magis Pro - Magis Pro V2 - Magis Combo Plus - Magis Combo
Plus V2 models (excluded from this supply), able to meet the
winter central heating / C.H., summer cooling needs, as well as the
production of domestic hot water, possibly with solar integration
(via special optional kit).

1.2 INSTALLATION RECOMMENDATIONS.

The Super Trio package has been designed to be installed inside
the walls using the special "Container Super Trio" recessed frames
or external to the wall using the "Domus Container Super Trio"
frame, fixing it with the support brackets supplied with the prod-
uct itself. . It has by no means been designed for installation on
basements or floors without the specific dedicated frame.
The place of installation of the appliance and relative Immergas
accessories must have suitable features (technical and structur-
al), such as to allow for (always in safe, efficient and comfortable
conditions):
- installation (according to the provisions of technical legislation
and technical regulations);
- maintenance operations (including scheduled, periodic, routine
and special maintenance);
- removal (outdoors in the place for loading and transporting the
appliances and components) as well as their eventual replace-
ment with appliances and/or equivalent components.
Only a professionally qualified heating/plumbing technician is
authorised to install the pack.
Installation must be carried out according to regulation standards,

1.3 PACKAGING.

72
current legislation and in compliance with local technical regula-
tions and the required technical procedures. Before installing the
pack, ensure that it is delivered in perfect condition; if in doubt,
contact the supplier immediately. Packing materials (staples, nails,
plastic bags, polystyrene foam, etc.) constitute a hazard and must
be kept out of the reach of children.
Keep all flammable objects away from the appliance (paper, rags,
plastic, polystyrene, etc.). In the event of malfunctions, faults or
incorrect operation, turn the device off immediately and contact
an authorised company (e.g. the Immergas Technical Assistance
Centre, which has specifically trained staff and original spare
parts). Do not attempt to modify or repair the appliance alone.
Failure to comply with the above implies personal responsibility
and invalidates the warranty.
Attention: The installation of the "Container Super Trio" inside
the wall or the "Domus Container Super Trio" must ensure stable
and effective support for the package. The kit ensures appropriate
support only if installed correctly (according to the rules of good
practice), following the instructions on its instructions leaflet. The
"Container Super Trio" for Super Trio is not a load-bearing struc-
ture and cannot replace the removed wall, it is therefore necessary
to check its positioning within the wall. For safety reasons against
any leaks it is necessary to plaster the pack housing in the brick wall.
This pack is used to heat water to below boiling temperature in
atmospheric pressure. It must be connected to a central heating
system and domestic hot water circuit suited to its performance
and capacity.
"Anti-legionella" heat treatment of the Immergas storage tank
unit (activated by the specific function present on the predisposed
thermoregulation systems): during this stage, the temperature of
the water inside the storage tank exceeds 60°C with a relative risk
of burns. Keep this domestic hot water treatment under control
(and inform the users) to prevent unforeseeable damage to people,
animals, things.
1