Immergas SUPER TRIO Instruction Booklet page 70

page of 136

/ 136
Contents
Table of Contents
Bookmarks

Table of Contents

Available languages

Congratulations for having chosen a top-quality Immergas product, able to assure well-being and safety for a long period of time. As an Immergas

Customer, you can also count on a qualified after-sales service, prepared and updated to guarantee constant efficiency of your "Super Trio" kit. Read the

following pages carefully: you will be able to draw useful tips on the proper use of the device, compliance with which will confirm your satisfaction with

the Immergas product.

For assistance and routine maintenance, contact Authorised Immergas Service Centres: they have original spare parts and are specifically trained directly

by the manufacturer.

All Immergas products are protected with suitable transport packaging.

The material must be stored in a dry place protected from the weather.

The instruction booklet is an integral and essential part of the product and must be given to the new user in the case of transfer or succession of ownership.

It must be stored with care and consulted carefully, as all of the warnings provide important safety indications for installation, use and maintenance stages.

This instruction manual provides technical information for installing the Immergas pack. As for the other issues related to pack installation (e.g. safety

in the work site, environment protection, injury prevention), it is necessary to comply with the provisions specified in the regulations in force and good

practice rules.

In compliance with legislation in force, the systems must be designed by qualified professionals, within the dimensional limits established by the Law.

Installation and maintenance must be performed in compliance with the regulations in force, according to the manufacturer's instructions and by

professionally qualified staff, intended as staff with specific technical skills in the system sector, as envisioned by the Law.

Improper installation or assembly of the Immergas appliance and/or components, accessories, kits and devices can cause unexpected problems for people,

animals and objects. Read the instructions provided with the product carefully to ensure proper installation.

Maintenance must be carried out by skilled technical staff. The Immergas Authorised After-sales Service represents a guarantee of qualifications and

professionalism.

The appliance must only be destined for the use for which it has been expressly declared. Any other use will be considered improper and therefore potentially

dangerous.

If errors occur during installation, operation and maintenance, due to non-compliance with technical laws in force, standards or instructions contained in

this book (or however supplied by the manufacturer), the manufacturer is excluded from any contractual and extra-contractual liability for any damage

and the appliance warranty is invalidated.

For further information regarding legislative and statutory provisions relative to the installation of gas heat generators, consult the Immergas site at the

following address: www.immergas.com

The Kit consists of separate units, some of which are excluded from this supply to allow the correct combination of features. Below are

the possible combinations through which the system is able to meet the winter central heating / C.H., summer cooling requirements,

as well as the production of domestic hot water:

Standard supply

Excluded from this supply

The company IMMERGAS S.p.A., with registered office in via Cisa Ligure 95 42041 Brescello (RE), declares that the design, manu-

facturing and after-sales assistance processes comply with the requirements of standard UNI EN ISO 9001:2015.

For further details on the product CE marking, request a copy of the Declaration of Conformity from the manufacturer, specifying the

appliance model and the language of the country.

Dear Customer,

General warnings