Room Chrono-Thermostats And Remote Controls; (Optional); Solar Control Unit Installation (Optional) - Immergas SUPER TRIO Instruction Booklet

1.14 ROOM CHRONO-THERMOSTATS
AND REMOTE CONTROLS

(OPTIONAL).

See the Internal Unit instruction booklet.
1.15 SOLAR CONTROL UNIT
INSTALLATION (OPTIONAL).
If necessary, it is possible to remove the contact
cover, by undoing the relevant fixing screw
(Fig. 44) and access the connections area (Fig. 45).
Description of the solar control unit controls.
1: The solar power storage tank is in operation.
2: Simplified system drawing.
- The pump logos switch on when they are
activated.
- The solid triangles on the valve logo indicate
circulation.
- The inside of the tank is active during filling.
3: Operating mode setting.
4: Name of the value or parameter displayed
under number "5".
5: Temperature of the various sensors or value of
the parameter displayed under number "4".
A: Keypad description:
Plus key (▶+);
Minus key (-◀);
Confirmation key or menu navigation key
(OK).
N.B.: on the main screen you can select the sensor
that must always be displayed; press the (OK) key
to display the desired sensor.
Installation menu.
Press the (OK) key for 5 seconds to access the
installation menu.
When you access the installation menu (the first
parameter "Syst" is displayed), it is possible to
select another parameter by pressing the (OK)
navigation key.
Once the desired parameter is displayed, it is possi-
ble to change the value using the keys (▶+) or (-◀).
110
8
7
6
Key:
A Control Unit;
1 Tank 1 sensor (T2) NTC 10k (105°C, 3M);
2 Manifold 1 sensor (T1) PT1000 (180°C, 1.5M);
3 Extra sensor for manifold 2 - (T4) PT1000 (180°C);
4 Extra sensor (T3) NTC 10k (105°C, 3M);
5 Power supply (230 Vac ± 10% - 50Hz);
6 Solar pump (P1);
7 Extra pump or valve (P2);
8 Extra pump or valve (P3) (dry contacts).
2
1
A
5
44
1
2
3
4
45
46