Immergas MAGIS M4-30 Use And Installation page 6

Magis M 18/22/26/30
NOTA
NOTE
The images in this manual are only used as a reference - refer to the actual product.
NOTA
NOTE
- The maximum length of the wiring that guarantees communication between the heat pump and the control panel is
50 m.
- The power cables and communication wires are laid separately and cannot be placed in the same duct. Otherwise there
would be electromagnetic interference. The power cables and wires for communication must not come into contact
with the refrigerant pipe which at high temperatures could damage the wires.
- The communication wires must be in shielded lines, including the line that goes from the heat pump to the control
panel.
Wiring diagram
Chilling system
Sistema di refrigerazione
6
Electric control system
Sistema di controllo elettrico
Terminal board
Morsettiera
Hydraulic system Sistema idraulico