Immergas MAGIS M4-30 Use And Installation page 29

To prevent water from penetrating into the control panel, use anchoring and stucco to seal the passage holes when install-
ing the wires.
7.5.4 Installation of front cover.
After having positioned the front cover, close it without blocking the wire during installation.
Install the rear cover correctly and firmly close the front and rear covers; otherwise the front cover will fall off.
Stucco Stucco
Folded
Cavo
Cable
Ripiegato
Stucco Stucco
Stucco Stucco
Cavo
Folded Cable
Cavo
Folded Cable
Ripiegato
Ripiegato
the sensor must be
il sensore deve essere
sheltered from humidity
al riparo dall'umidità
29