Immergas MAGIS M4-30 Use And Installation page 114

10.5.13 Auto Restart.
The AUTO RESTART function allows you to select whether the unit reapplies the settings of the control panel when the
current returns after a power failure.
Go to MENU>FOR SERVICEMAN>13.AUTO RESTART.
The AUTO RESTART function reapplies the settings of the control panel when there is a power failure. If this function is
disabled, the unit will not restart automatically when current returns after a power failure.
10.5.14 Power Input Limitation.
How to set the power input limitation.
Go to MENU>FOR SERVICEMAN>14.POWER INPUT LIMITATION.
10.5.15 Input Define.
How to set Input Define.
Go to MENU>FOR SERVICEMAN>15. INPUT DEFINE.
13. AUTO RESTART
13.1 COOL/HEAT MODE
13.2 DHW MODE
ADJUST
14. POWER INPUT LIMITATION
14 LIMITE POTENZA ASSORBITA
14.1 POWER LIMITATION
ADJUST
15. INPUT DEFINE(M1M2)
15 DEFINIZ. INGRESSO
ADJUST
15. INPUT DEFINE(M1M2)
15 DEFINIZ. INGRESSO
15.6 Ta
15.7 Ta-adj
15.8 SOLAR INPUT
15.8 INPUT SOL.
15.9 F-PIPE LENGTH
15.9 LUNG. TUBO F
15.10 RT/Ta_PCB
ADJUST
114
YES
NO
REMOTE
REMOTO
NO
NO
NO
NO
HMI
-2℃
NO NO
<10m
NO NO