Fan - HP ENVY x360 Maintenance And Service Manual

3. Remove the OLED board (3).
To install the OLED board, reverse this procedure.

Fan

To remove the fan, use this procedure and illustration.
Table 5-9
Description
Fan
Before removing the fan, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the fan:
1. Remove the tape that secures the cables to the fan (1).
56 Chapter 5 Removal and replacement procedures for authorized service provider parts
Fan description and part number
Preparation for disassembly on page
Bottom cover on page
Spare part number
N15692-001
41).
Battery on page 43).
41).