Oled Board - HP ENVY x360 Maintenance And Service Manual

To install the I/O board, reverse this procedure.

OLED board

The OLED board is available on select products only. To remove the OLED board, use this
procedure and illustration.
Table 5-8
Description
OLED board
Before removing the OLED board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the OLED board:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the board to the computer.
2. Disconnect the cable from the connector on the OLED board (2).
OLED board description and part number
Preparation for disassembly on page
Bottom cover on page
Spare part number
N15696-001
41).
Battery on page 43).
OLED board
41).
55