4.
If the WLAN antenna is not connected to the terminal on the WLAN module, install a
protective sleeve on the antenna connector, as shown in the following illustration.
To install the WLAN module, reverse this procedure.
Speakers
To remove the speakers, use this procedure and illustration.
Table 5-6
Description
Speakers (includes cushion and sponge)
Before removing the speakers, follow these steps:
1.
Prepare the computer for disassembly (see
2.
Remove the bottom cover (see
3.
Disconnect the battery cable from the system board (see
Remove the speakers:
52
Chapter 5 Removal and replacement procedures for authorized service provider parts
Speaker description and part number
Preparation for disassembly on page
Bottom cover on page
Spare part number
N15680-001
41).
Battery on page
43).
41).