To avoid hand contact, transport products in static-safe tubes, bags, or boxes.
●
Protect ESD-sensitive parts and assemblies with conductive or approved containers
●
or packaging.
Keep ESD-sensitive parts in their containers until the parts arrive at static-free
●
workstations.
Place items on a grounded surface before removing items from their containers.
●
Always be properly grounded when touching a component or assembly.
●
Store reusable ESD-sensitive parts from assemblies in protective packaging or
●
nonconductive foam.
Use transporters and conveyors made of antistatic belts and roller bushings. Be
●
sure that mechanized equipment used for moving materials is wired to ground and
that proper materials are selected to avoid static charging. When grounding is not
possible, use an ionizer to dissipate electric charges.
Accessing support information
To find the HP support that you need, use this information.
38
Chapter 4 Removal and replacement procedures preliminary requirements