Table of Contents
Advertisement
HOW TO OPERATE
Starting Your New Freezer
1.
Clean the freezer thoroughly. Wipe the outside with a soft dry cloth, the interior with a
clean moist cloth.
2.
Insert the power supply cord into the socket.
3.
Turn the thermostat dial to "7". Close the door and let the freezer operate for 15-20
minutes.
Temperature Control
To control the internal temperature, adjust the thermostat dial. "1" is the warmest setting.
"7" is the coldest. The dial may be set any place on the scale. It does not have to be set exactly
on a number. To make ice cubes in the freezer compartment, adjust the thermostat to the
coldest setting.
Note:
If you unplug the freezer, wait 3-5 minutes beforerestarting.
The unit may fail to operate properly if restarted too quickly.
HOW TO DEFROST
Defrost the freezer when the frost accumulated on the evaporator is about 1/8" thick. Set the
thermostat dial to "OFF" or "0" to defrost. Remove all contents from the freezer compartment.
Leave the freezer door open to allow accumulated ice/frost to melt. Remove large pieces of ice
as needed. Do not use hot water or other electric heating devices to melt the accumulated ice.
After defrosting, remove accumulated ice/water and wipe the freezer compartment with a soft
cloth. Restart the unit per starting instructions. Never use a knife
instrument to scrape ice/frost from the inside of the unit.
6
or
other
sharp
Hide quick links:
Advertisement
Table of Contents
