Anker Soundsync A3309 User Manual

User manual of Anker Soundsync A3309
1. Introduction
1.1 Instructions
USB Port
Power on: In the power-off state, plug the USB interface into the computer to power on the "product".
Power off: in the power-on state, pull out the USB interface "product" to power off.
Enter the pairing state: when there is no pairing record, it will automatically enter the pairing state when it is
turned on.
Reconnect: you can reconnect and pair used bluetooth headset in these situations:
1) Reconnect the USB to the computer and then turn on the headphone;
2) Or turn on the headphone and then plug the USB into the computer;
3) Or back to the connection distance after disconnection because of exceeding the connection distance(within
the headphone linkloss time range).
1.2 LED Indicator status display
Power on: the blue light flashes.
Power off: the blue light goes out.
Pairing status: the blue light flashes quickly (only for the production line to verify whether the emptying is
effective).
Back connection status: the blue light flashes slowly.
LED Indicator