Advertisement

Anker Soundcore Flare Mini Manual

Safety Instructions

  • Avoid dropping.
  • Do not disassemble.
  • Soundcore Flare Mini can be immersed in water up to 1m for up to 30 minutes.
  • Avoid extreme temperatures.
  • Do not use the device outdoors during thunderstorms.
  • Use original or certified cables.
  • Do not use any corrosive cleaner/oil to clean.
  • Do not expose batteries to high heat as direct sunlight, fire and Etc.

What's Included

What's Included Step 1What's Included Step 2What's Included Step 3What's Included Step 4

At a Glance

At a Glance

  1. Bluetooth Button
  2. Volume + and - Buttons
  3. Multi-function Button
  4. Light Effects Button
  5. Power Button
  6. micro USB Port

Using Your Soundcore Flare Mini

  1. Turn On / Off
    Using Your Soundcore Flare Mini Step 1
    ON Press
    OFF Press and hold for 2 seconds
    1. Bluetooth mode
      Using Your Soundcore Flare Mini Step 2
      Flashing Blue Bluetooth Pairing Mode
      Solid Blue Connected to a device
      Enter True Wireless Stereo Stereo Pairing Mode / Disconnect True Wireless
      Slow Flashing White True Wireless Stereo Pairing Mode
      Solid White Connected to True Wireless Stereo
      Using Your Soundcore Flare Mini Step 3
      information
      With True Wireless Stereo technology, you can pair your Soundcore Flare Mini with another Bluetooth speaker to explore the best sound effects with left and right sound channels separated on both speakers.
      Play / Pause
      Play Next Song
      Play Previous Song
      Answer Call / End Call
      Reject Call / Switch between a call on hold and an active call
      End current call and answer incoming call / End current call and switch to call on hold
      Switch audio source between Speaker and Phone
      Activate Siri / Other Voice Control Software
      Volume Up / Down
      Solid White On a Call
      Flashing White Incoming Call
      Press and hold for 2 seconds to turn Light Effects Off
      Press to turn Light Effects On
      Press once to switch between Light Effect modes

information
When turned on, Soundcore Flare Mini will automatically connect to the last connected device if available. If not, press the Bluetooth pairing button to activate pairing mode. To pair a different device, press the Bluetooth button to re-enter pairing mode. Then repeat the pairing steps. Having connection problems? Remove Soundcore Flare Mini from your device's Bluetooth history and ensure it's less than 3 feet away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.

Charging your Soundcore Flare Mini

Charging your Soundcore Flare Mini

Slow Flashing Red Low Battery
Solid Red Charging
Fully Charged

information
Use the included USB cable to charge your Soundcore Flare Mini and make sure it is fully charged before its first use.

Disconnect your speaker from the charger when fully charged. Do not charge your speaker for extended periods.

When not in use, store your speaker in a cool place.

Specifications

information
Specifications are subject to change without notice.

Input: 5 V ⎓ 1 A
Audio output: 5 W x 2
Battery capacity: 2600 mAh
Charging time: 3.5 hours
Play time (varies by volume level and music content): 12 hours
Size: 141 x 86 x 72 mm
Weight (without packaging): 480 g / 16.9 oz
Bluetooth version: V4.2 Range: 20 m / 66 ft

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the radio equipment type A3167 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: www.soundcore.com
Bluetooth Maximum output power: 2.0dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Customer Service

24-month limited warranty
Lifetime technical support
service@soundcore.com

+1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 - 11:00

For FAQs and more information, please visit:
soundcore.com/support

@SoundcoreAudio

@soundcoreaudio

@soundcoreaudio

Soundcore

Videos

ANKER Soundcore Flare Mini Review Video

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Anker Soundcore Flare Mini Manual

Advertisement

Need Assistance?

Do you have a question about the Soundcore Flare Mini that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents