Anker Soundcore Infini Pro Manual

What's included

Soundcore Infini Pro

Power cord

Remote control

2 × AAA batteries

HDMI 2.0 cable

Wall mount positioning card

Wall mount brackets

Screws

User manual

Safety Instructions

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not use any corrosive cleaner/oil to clean.
• The product should not be exposed to dripping or splashing water.
• Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable.

At a Glance

Front touchpad:

1. Power button
2. Source input button
3. Bluetooth button
4. Volume-down button
5. Volume-up button

Status indicator:

6. HDMI indicator
7. TV indicator
8. AUX indicator
9. Bluetooth indicator
10. Sound mode indicator
11. Surround indicator

Rear:

12. AC IN
13. TV IN (OPT)
14. AUX IN
15. USB port
16. HDMI IN
17. HDMI OUT (ARC)
18. Wall mount screw holes

Placement

• Table Placement

1. Place the soundbar on a solid surface with the touch panel facing up.
   

• Wall Mount Installation

1. Place the wall mount brackets over the wall mount screw holes on the rear of the soundbar. Insert the 4 screws provided into the wall mount screw holes, then fasten the screws.
   
2. Place the wall mount positioning card against the wall, under your TV. Mark the 2 bracket holes on the wall with a pencil, then drill two holes on the wall. Insert two screws into the holes.
   
3. Hang the soundbar on the wall.
   

Remote Control

Battery installation

Remote control buttons

Button	Button functions
Power button	Press to switch the soundbar on / off. Note: the status indicator of the previously set input source will flash when soundbar is turned on.
Source input button	Select an input source for playback: HDMI: Sound from a device connected via HDMI IN TV: TV audio (TV IN (OPT) and HDMI OUT (ARC) AUX: Sound from a device connected via AUX IN BLUETOOTH: Sound from a Bluetooth device Refer to d. Basic Operation chapter for details.
TV button	Switch to TV source.
Previous	Return to the previous track.
Play / Pause	To pause/resume playback.
Sound mode buttons	To activate movie, music, or voice mode. Refer to e. Sound Modes chapter for more information.
Bass + and Bass - buttons	To increase / decrease the bass. Refer to g. Bass chapter for reference.
Surround	To activate the Dolby Surround effect. Refer to e. Playback with Surround sound chapter for reference.
Mute button	To temporarily turn off the sound. Press the button again to turn the sound back on.
Bluetooth button	To activate Bluetooth mode. Press to activate Bluetooth mode. Refer to c. Bluetooth mode chapter for information.
Volume-up button	To increase the volume.
Next	Move to the next track.
Volume-down button	To decrease the volume.

Using Your Soundbar

Note: The soundbar will automatically switch to standby mode when no audio input is received for 15 minutes. The soundbar will wake up from standby mode when any button is pressed or source input is received.

Connect to your TV

HDMI ARC connection (For TVs that support ARC)

Note: The Audio Return Channel (ARC) function enables an HDMI compatible TV to send the audio stream to HDMI OUT of the unit.

1. Connect HDMI cable to the HDMI OUT (ARC) port on the rear of the soundbar.
2. Connect the other end of the HDMI cable to the HDMI IN ARC port on the TV.
3. Tap the source input button on the soundbar or remote control to activate the corresponding mode.

Optical connection (For TVs that do not support ARC)

1. Connect the optical cable to the TV IN (OPT) jack on the rear of the soundbar.
2. Connect the other end of the optical cable to audio output jack on TV.
3. Tap the source input button on the soundbar or remote control to activate the corresponding mode.

Note: The TV IN (OPT) jack cannot be used when a TV that supports the Audio Return Channel is connected to the soundbar.

Connect to other devices

HDMI IN connection

1. Connect the HDMI cable to the HDMI IN port on the rear of the soundbar.
2. Connect the other end of the HDMI cable to the HDMI output port on the playback devices.
3. Tap the source input button on the soundbar or remote control to activate the corresponding mode.

AUX connection

1. Connect the audio cable to the AUX IN port on the rear of the soundbar.
2. Connect the other end of AUX cable (not provided) to the audio output jack on the device.
3. Tap the source input button on the soundbar or remote control to activate the corresponding mode.

Note: Follow your device's user manual if you want to connect the soundbar to your other devices (such as Blu-ray player, game console, tablet, MP3 Player, laptop etc).

Note: 3.5mm to 3.5mm cable is not included.

Bluetooth Mode

1. Press power button on the remote control to switch on the soundbar.
2. Press the Bluetooth button on the remote control to activate Bluetooth pairing mode.
3. Turn on the Bluetooth of your device, search for Soundcore Infini Pro on your Bluetooth list then select connect.

Flashing white (Bluetooth indicator)	Bluetooth mode is activated
Solid white	Connected to device

Hold Bluetooth button for 3 seconds to activate Bluetooth pairing mode.
Having connection problems? Remove Soundcore Infini Pro from your device's Bluetooth history and ensure it's less than 10 meters away. Then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your soundbar.

Basic Operation

1. Press the power button on either the remote control or the soundbar to turn on the soundbar.
2. Switch on the connected device (such as TV, playback devices, game console etc).
3. Press the source input button on either the remote control or the soundbar to select your desired input source.

Note: The status indicator of the selected input source will flash.

Press volume buttons to control the volume of the sound. The LED indicator indicates the level of volume.

	Volume Up / Down
	Mute

Note: the volume cannot be controlled by the volume buttons on soundbar when sound input to the HDMI IN port is output from the TV.

Dolby Atmos

What is DOLBY ATMOS^®?
Dolby Atmos^® transports you from the ordinary into the extraordinary with breathtaking, moving audio that fills your room and flows above and around you.

Using DOLBY ATMOS^®:
DOLBY ATMOS^® is only available in HDMI IN and HDMI OUT (ARC) mode.

• Your TV must support DOLBY ATMOS^® in order to use DOLBY ATMOS^® in HDMI OUT (ARC) mode.
• Set the audio output sampling rate to 192 kHz if you can adjust it.

This soundbar supports 4K Passthrough and DOLBY VISION. When you play a disc which supports 4K video signal, the signal can be delivered to your TV.

Sound Modes

Select a suitable sound mode for your media.

Playback with Surround Sound

Press the surround button on the remote control to switch on the Surround on / off mode.

Bass

Press Bass + and Bass - buttons on the remote control to adjust the bass.

Using your TV's Remote Control to Operate the Soundbar

Use your own TV remote control to control your Soundbar (Applicable for most Vizio, LG, Philips TVs).

Note: only the power, source input, and volume of your soundbar can be controlled by your TV remote control.

Download the Soundcore App for an enhanced product experience. Follow onscreen instructions to set up.

When not in use, store your soundbar in a cool place.

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the radio equipment type A3372 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address:
https://www.soundcore.com/
Maximum output power: 0dBm
Frequency band: 2.4G band (2.4000GHz-2.4835GHz)
Anker Innovations Limited / Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Specifications

Specifications are subject to change without notice.

Videos

Anker Soundcore Infini Pro - Unboxing, Setup, & Review Video

Documents / Resources

References

• Soundcore Headphones & Speakers - Hear it, Feel it - Soundcore US

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Anker Soundcore Infini Pro Manual