Anker Soundcore mini 2 Manual

Safety Instructions

• Avoid dropping.
• Do not disassemble.
• Do not submerge in water.
• Avoid extreme temperatures.
• Do not use the device outdoors during thunderstorms.
• Use original or certified cables.
• Do not use any corrosive cleaner/oil to clean.

What's Included

At a Glance

1. Battery indicator
2. Power switch
3. Volume - / +
4. Multi-function button
5. Bluetooth pairing button
6. Status indicator
7. Microphone
8. Micro USB charging port
9. 3.5mm Aux input

Using Your Soundcore mini 2

Turn on / off

Bluetooth mode

		Flashing blue	Pairing mode
		Steady blue	Connected to a device
			Bluetooth pairing mode
		Flashing white	True Wireless Stereo pairing mode
		Steady white	Connected to True Wireless Stereo

Enter True Wireless Stereo pairing mode / Disconnect True Wireless Stereo


With True Wireless Stereo technology, you can connect your Soundcore mini 2 to another Bluetooth speaker and explore the best sound effects with left and right sound channels separated on different Bluetooth speaker.

		Play / pause
		Volume up / down
		Next track
		Answer / End call / Put current call on hold and answer incoming call / Switch between held call and active call
		Reject call / Transfer a call between speaker and mobile phone
		Activate Siri / other voice control software
	Steady blue	On a call
	Flashing blue	Incoming call

When turned on, Soundcore mini 2 will automatically connect to the last connected device if available. If not, press Bluetooth button to activate the pairing mode.
Having connection problems? Remove Soundcore mini 2 from your device's Bluetooth history, ensure it's less than 3 feet away then try pairing again. To get the best sound quality, make sure there is a clear line of sight between the connected device and your speaker.

1. AUX-In mode
   
   * SoundLine AUX cable sold separately.
   
   Plugging in an audio cable will automatically switch to Aux mode.

   Volume up / down

   When using AUX mode, control audio playback via the connected device.

Charge your Soundcore mini 2

	Flashing red	Low power
	Steady red	Charging
		Fully charged

Use the included USB cable to charge your Soundcore mini 2 and make sure it is fully charged before first use.

Disconnect your speaker from charger when fully charged. Do not charge your speaker for extended periods.

When not in use, store your speaker in a cool place.

Specifications

Specifications are subject to change without notice.

Input: 5 V ⎓ 1 A
Audio output: 6 W
Battery capacity: 1850 mAh
Charging time: 2-3 hours
Play time (varies by volume level and content): 15 hours
Size: 69.5 x 69.5 x 80 mm / 2.7 x 2.7 x 3.1 in
Weight (without packaging): 207g / 7.3 oz
Bluetooth version: V4.2 + EDR
Range: 20 m / 66 ft

Declaration of Conformity

Hereby, Anker Innovations Limited declares that the radio equipment type A3107 is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: anker.com/support

BT Maximum output power: 4.0dBm
BT Frequency band: 2.4G band (2.4000GHz-2.4835GHz)

Anker Innovations Limited
Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hongkong

Customer Service

18-month limited warranty

Lifetime technical support

support@anker.com

+1 (800) 988 7973 (US) Mon-Fri 9:00 - 17:00 (PT)
+44 (0) 1604 936200 (UK) Mon-Fri 6:00 - 11:00 (GMT)
+49 (0) 69 9579 7960 (DE) Mon-Fri 6:00 - 11:00

For FAQs and more information, please visit:

anker.com/support

@Anker Official
@Anker Japan
@Anker Deutschland

@AnkerOfficial
@Anker_JP

@Anker

Videos

Anker SoundCore Mini 2 Review Video

Documents / Resources

References

• Anker | Charge Fast, Live More

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Anker Soundcore mini 2 Manual