Preparation; Charging Your Hearing Aids - Miracle-Ear EarENERGY 5 RIC R EV User Manual

Preparation

Charging Your Hearing Aids

• Place your Miracle-EarENERGY
hearing aids into charging ports with
earbuds/earmolds resting in the reservoir
• Your hearing aids will turn off automatically and begin to
charge, so long as your charger is plugged into an external
power source (i.e. wall outlet).
• Your hearing aids will automatically power on when removed
from the charger, so long as your charger is plugged into an
external power source (i.e. wall outlet).
• Upon plugging the charger into an external power source
(i.e.wall outlet), the hearing aid charging LEDs will turn on for
a few seconds to indicate connection to the power source.
• To illuminate the front LEDs, remove a hearing aid from its
charging port/post for three seconds and then re-insert it.
LEDs illuminate for 10 seconds before turning off.
8
RIC R EV
™
• The LEDs corresponding to each hearing aid:
– Glowing Green = Charging
– Solid Green = Fully Charged
– Blinking Red = Fault State. To reset, remove the hearing aids
from charger, wait until LED turns off and re-insert aids. If
Fault State continues, call your Miracle-Ear
Professional.
• Charging occurs with the lid open or closed; your hearing
aids will be fully charged in under 3 ½ hours.
• It is safe to store hearing aids in the charger after they are fully
charged and any time that you are not wearing them.
• If you will not be wearing your hearing aids for an extended
period of time (i.e. weeks), remove your hearing aids from the
charging ports/posts. You will need to manually power off the
hearing aids by pressing the user control on each hearing aid
for three seconds.
• The desiccant puck provided with the Miracle-EarCHARGE
start will be effective for 3–6 months depending on moisture
in the hearing aids and humidity. When the desiccant puck
fades from blue to white, it should be replaced.
Preparation
Hearing Care
®
™
9