Operation; Power On & Off; Auto On/Off; User Controls - Miracle-Ear EarENERGY 5 ITC R EV User Manual

Operation

Power On & Off
ON - The hearing aids will power on automatically after removing
them from the charger. There is a delay that allows you time
to insert your hearing aid into your ear.
ON - If the hearing aid is manually powered off, pressing the push
button will power it on. The delay still exists, to give you time
to insert the hearing aid in your ear.
OFF - The hearing aids will power off automatically when placed in
the charging port. Charging will proceed.
OFF - The hearing aids can be powered off manually by pressing
the push button for three seconds.

Auto On/Off

Your hearing aid may support the ability to automatically go into
a low-powered state to conserve battery
configured by your Miracle-Ear
your hearing aid on a flat, stable surface (e.g., a table) with the tip
facing upwards and it will go into a low-powered state after about
15 minutes.
*Hearing aid may support
12
. This control can be
*
Hearing Care Professional. Place
®
To resume normal hearing aid function, pick up your hearing aid
and place it in your ear. Your hearing aid will detect this motion
and switch back on again. You may hear a tone indicating that
your hearing aid is powered on.

User Controls

Your hearing aid's user control may have been customized by
your Miracle-Ear ® Hearing Care Professional. Ask your Miracle-Ear
Hearing Care Professional how the user control on your hearing
aid is set.
Available User Control Functionality
The user control on your hearing aid can respond
differently depending on how long you activate
(press) the button. Your hearing aid is capable of
having one function assigned to a short press (press and release)
and one function assigned to a long press (press and hold). The
options selected on the next page indicate how your user control
is configured.
Operation
13