Table of Contents
Advertisement
Available languages
Available languages
Preparation
Batteries
Your hearing aid uses a battery as its power source. The battery
size can be identified by the yellow (10) color code on the
packaging.
To insert or replace the battery:
1.
Use the finger pick on the battery door.
2.
Open the battery door gently and remove the old battery.
3.
Remove the colored tab from the new battery. Wait 3-5
minutes after removing tab before inserting battery.
4.
Align the battery's "+" sign (flat side of the battery) with the
"+" on the battery door.
5.
Close the battery door.
Battery Indicators
An indicator will sound when the battery voltage is low. You have
approximately five minutes
may also sound just before the battery stops working.
* Actual time between low battery indicator and shut down will vary depending on environmental
noise levels and brand of battery used.
8
to replace the battery. An indicator
*
Preparation
1
2
3
4
5
9
Advertisement
Chapters
Table of Contents
