Miracle-Ear EarLINK TV Streamer AV User Manual page 5

Basic Use
To quickly start using the Miracle-EarLINK
a typical setup:
1. Remove the plastic caps from both ends of the TOSLINK cable.
2. Attach a TOSLINK cable into the Audio OUT jack on your
electronic audio source. Power on your electronic audio
source.
NOTE:
If there is no TOSLINK audio OUT jack, try a different
electronic audio source or try the 3.5 mm to RCA cable.
3. Attach the other end of TOSLINK cable to the rear of the
Miracle-EarLINK TV Streamer AV (jack B).
™
4. Plug the power adapter into the wall socket.
NOTE: If the power adapter does not have the proper plug
configuration, refer to Assembling the Power Adapter section
on page 16.
5. Insert the power adapter microUSB connector into the rear
of the Miracle-EarLINK
6. Press the power button on the Miracle-EarLINK
AV to turn it on.
8
TV Streamer AV with
™
TV Streamer AV (jack A).
™
TV Streamer
™
Audio Out
1 2
C
B
3 4
5 6
Basic Use
9