Franklin 58306 Owner's Manual & Safety Instructions page 5

Operating Instructions
Read the ENTIRE
IMPORTANT SAFETY
INFORMATION section
at the beginning of this
document including all
text under subheadings
therein before set up or
use of this product.
1. Hold the Control Lever in its
highest position to lower the Forks,
then release the Control Lever.
2. Slide the Forks under the load,
being careful to center the load over
the Forks, and to have the main
weight of the load resting as near
as possible to the Steering Wheels.
58306
For technical questions, please call 1-888-866-5797.
3. Push the Control Lever down to
the Raise position, then pump the
Handle until the load is raised off
the floor and is resting on the Forks.
4. Move the Control Lever to the
Drive position and wheel the
load to the desired location.
5. Hold the Control Lever in its
highest position to lower the Forks,
then release the Control Lever.
6. Slide the Forks out from
under the load.
7. When finished using the Jack, hold
the Control Lever in its highest
position to Lower the Forks.
8. Store in a clean dry place
away from children.
Page 5