Dyson cyclone V10 User Manual page 8

Clearing blockages from your
Mini motorised tool
Mini Motorised tool may not be included in box.
Your Mini motorised tool doesn't have a washable brush bar. To maintain
optimum performance, check your brush bar regularly and clear any
obstructions.
Make sure your machine is disconnected from the charger and take care not
to touch the trigger.
Remove your brush bar
Don't put any part of your machine in a dishwasher or use detergents,
polishes or air fresheners.
Use a coin to unlock the end cap.
Twist the end cap and remove it from your brush bar. Don't wash the end cap.
Slide your brush bar out of the cleaner head.
Look for obstructions
Clear any debris from your brush bar.
Check inside the cleaner head and remove any debris or blockages.
Your Mini motorised tool and brush bar aren't washable. Wipe over with a
damp lint-free cloth.
Replace your brush bar
Push the end cap back on to your brush bar and slide it back into the
cleaner head.
Turn the end cap into the locked position.
Your cleaner head isn't washable and should only be wiped over with a damp
lint-free cloth.