Clearing Blockages - Dyson cyclone V10 User Manual

Cleaning your bin
Remove your bin
If it is necessary to clean your bin, empty it as shown in the 'Emptying your
bin' section.
Press the red button located on the bin runner to release the bin and slide
your bin off the runner.
Only use a damp, lint-free cloth to clean your bin.
Make sure that your bin and seals are completely dry before replacing.
Refit your bin
Insert the spine on to the bin runner.
Close your bin by pushing the bin base upwards until the bin and bin base
click
click into place.
Your bin isn't dishwasher safe and the use of detergents, polishes or air
fresheners to clean your bin isn't recommended, as it may damage
your machine.

Clearing blockages

Disconnect your machine from the charger before looking for blockages.
Be careful not to touch the power button and be aware of sharp objects.
Leave your machine to cool down before looking for blockages.
Don't use your machine when looking for blockages as this could cause injury.
If your machine detects a blockage, the motor will pulse six times. You won't
be able to use your machine until the blockage has been cleared.
If you try to use your machine when the motor is pulsing, it will automatically
cut out.
Leave your machine to cool down before looking for blockages and, for your
safety, take care not to touch the trigger.