Touchpad - HP 15-fb0 Series Maintenance And Service Manual

3. Lift the right edge of the system board, and then pull the board up and to the right to remove it from the
computer (2).
To install the system board, reverse this procedure.

Touchpad

To remove the touchpad, use this procedure and illustration.
Table 6-11 Touchpad description and part number
Description
Touchpad, ceramic white
Touchpad, mica silver
Touchpad, performance blue
Touchpad cable
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the fan assembly (see
5. Remove the system board with the heat sink installed (see
Remove the touchpad:
Preparation for disassembly on page
Bottom cover on page
Battery on page 38).
Fan assembly on page
36).
45).
System board on page
Spare part number
N13309-001
N13310-001
N13311-001
N13312-001
36).
50).
Touchpad 53