I/O Board - HP 15-fb0 Series Maintenance And Service Manual

3. Remove the cable from the clips on the fan assembly (4).
To install the power connector cable, reverse this procedure.

I/O board

To remove the I/O board, use this procedure and illustration.
Table 6-7 I/O board description and part number
Description
I/O board
I/O board cable
Before removing the I/O board, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Disconnect the battery cable from the system board (see
Remove the I/O board:
1. Remove the Phillips M2.0 × 3.0 screw (1) that secures the bracket to the computer, and then remove the
bracket (2).
2. Disconnect the cable from the ZIF connector on the I/O board (3).
Preparation for disassembly on page
Bottom cover on page 36).
36).
Battery on page 38).
Spare part number
N13300-001
N13301-001
I/O board 47