Advertisement
Quick Links
Operation
Q:
How should I maintain Life P2i?
A:
1. Use the earbuds regularly to avoid over-discharge which can harm the lifespan of the earbuds' battery. We
recommend using Life P2i at least once a month.
2. Charge the earbuds after using them. To improve the battery's lifespan, do not always wait until there's less
than 20% power remaining to charge them.
3. If you intend to store the charging case, make sure there are at least 2 LED indicators that light up on the case
to ensure there is enough power.
4. Open the lid of the charging case at least once a month to ensure the earbuds are still working.
5. Regularly clean the charging pins on the earbuds and charging case.
6. Keep the ear tips clean.
7. If Life P2i comes into contact with liquid, use a hairdryer on the "Cool" setting to dry the case.
Q:
Can I use the left/right earbud on its own?
A:
Yes, just take one earbud out of the charging case to use. If you are using two earbuds, you can put either one of
the earbuds back into the charging case and continue using the other one on its own.
Q:
Why can't I power on the earbuds?
A:
The earbuds will automatically power on when the charging lid is opened. You cannot power on the earbuds
without the charging case.
1. Remove the protective film covering the connectors on the earbuds.
2. Make sure the charging case has enough power.
3. Place the earbuds in the charging case, then reopen the lid.
Fit
Q:
Why are my Life P2i earbuds not fitted properly?
A:
You may refer to the following tips for a more secure fit:
1. Locate the L/R logo on the back of the earbuds to ensure that the right and left ears are properly worn.
2. Choose the ear tips that fit the ear canal best to replace.
3. Turn the earbuds and find the most comfortable position.
Reset
Q:
How do I reset Life P2i?
A:
- Put the earbuds into the charging case and keep the lid open. Then, hold the button on the charging case for 10
seconds until the LED flashes red 3 times.
- Release the button for 3-4 seconds, and you will see a pulsing white LED light indicating the Bluetooth pairing
state.
FAQs for A3991
Advertisement
Related Manuals for Anker Soundcore Life P2i
Summary of Contents for Anker Soundcore Life P2i
- Page 1 FAQs for A3991 Operation How should I maintain Life P2i? 1. Use the earbuds regularly to avoid over-discharge which can harm the lifespan of the earbuds' battery. We recommend using Life P2i at least once a month. 2. Charge the earbuds after using them. To improve the battery’s lifespan, do not always wait until there's less than 20% power remaining to charge them.
- Page 2 4. Turn on the Bluetooth of your device and search for Soundcore Life P2i and pair. If there is a pop-up window to confirm pairing for "Soundcore Life P2i," please select "Pair." If you accidentally select "Cancel," you need to refresh (turn off and turn on) the Bluetooth of your device and pair the earbuds again.
- Page 3 1. Try to download the videos and songs before watching them. 2. If you are not using an iPhone, please temporarily turn off some unnecessary app traffic settings on the phone. These apps will run in the background and occupy the 2.4GHz signal of the phone. 3.
- Page 4 1. If you are wearing a single earbud, make sure that the other earbud is in the charging case. 2. Make sure "Soundcore Life P2i" is the selected audio output device, turn up the volume on your device, and ensure the microphones on the earbuds are directed toward your mouth.
- Page 5 - Release the button for 3-4 seconds and you will see a pulsing white LED light indicating the Bluetooth pairing state. 3. Make a standard phone call on another phone to see if it makes any difference. Why are there disconnections during calls? 1.
- Page 6 4. Clean the charging pins with a dry cloth and an alcohol-based disinfectant. This is to ensure all charging contact pins on the earbuds and charging case are completely clean and dry of sweat and water. Then, put the earbuds correctly in the case.