Audio Induction Loops; Maintenance And Care; Hearing Aids - Miracle-Ear MEENERGY B SP 5 User Manual

Audio induction loops

Some telephones and public places like theatres
offer the audio signal (music and speech) via an audio
induction loop. With this system, your hearing aids can
directly receive the desired signal – without distracting
noise in the environment.
You can usually recognize audio
induction loop systems by certain signs.
Whenever you are in a place with an audio induction
loop:
Switch to the telecoil program.
X
If a telecoil program is configured for your hearing
aids, it is listed in section "Hearing programs".
Telecoil program and remote control
NOTICE
For aids with wireless connectivity:
When the telecoil program is active, the remote
control may cause a pulsing noise.
Use the remote control with a distance greater
X
than 10 cm (4 inches).
20

Maintenance and care

To prevent damage it is important that you take care of
your hearing aids and follow a few basic rules, which
will soon become a part of your daily routine.

Hearing aids

Cleaning
Your hearing aids have a protective coating. However,
if not cleaned regularly you may damage the hearing
aids or cause personal injury.
Clean your hearing aids daily with a soft, dry tissue.
X
Never use running water or immerse the
X
devices in water.
Never apply pressure while cleaning.
X
Do not use alcoholic solvent on the charging
X
contacts.
To avoid corrosion, use a soft and dry tissue to wipe
X
off sweat or liquid from the charging contacts or
hearing aids before inserting them in the charger.
Ask your Hearing Care Specialist for recommended
X
cleaning products, special care sets, or more
information on how to keep your hearing aids in
good condition.
21