Turning Your Hearing Aids On And Off; Switching To Standby Mode - Miracle-Ear MEENERGY iRIC R CHARGE User Manual

Low power indication of the hearing aids
You will hear an alert signal to indicate the power cell is running
low. The signal will be repeated every 20 minutes. Depending on
the usage of your hearing aids, you have approximately 1.5 hours
to charge your hearing aids before they stop working.

Turning your hearing aids on and off

You have the following options to turn your hearing aids on or off.
X Turning on: Take the hearing aids out of the charger.
The startup melody is played in your hearing aids. The default
volume and hearing program are set.
X Turning off: Place the hearing aids in the charger.
Note that the charger must be on.
24

Switching to standby mode

Via remote control, you can switch your hearing aids to standby
mode. This will mute the hearing aids. When you leave standby
mode, the previously used volume and hearing program are set.
Note:
●
In standby mode, the hearing aids are not turned off
completely. They draw some power.
Therefore, we recommend to use standby mode only for a
short period of time.
●
If you want to leave standby mode, but the remote control
is not available: Turn your hearing aids off and on again (by
shortly placing them in the charger until one or more LEDs
light up). Wait until the startup melody is played in your
hearing aids. This may take several seconds. Note that the
default volume and hearing program are set.
25