Miracle-Ear GO Remote User Manual page 11

Hold down the
X
sound is played in the hearing aids. It takes
approximately 2 seconds for the sound to start playing.
Ensure that the confirmation sound is heard in both
X
hearing aids. When heard, the pairing will be complete.
The remote control will remain in setup mode for an
additional 30 seconds. The confirmation sound can
be played again by pressing
To exit the setup mode of the remote control,
X
wait 30 seconds or move the key lock switch to
the lock position (red color visible).
button until the pairing confirmation
during these 30 seconds.
11