Audio Input (Fm System) - Miracle-Ear MECONNECT BTE 13 User Manual

If a telecoil program is con gured for your hearing aids, it is listed
in section "Settings."
Telecoil program and remote control
NOTICE
For hearing aids with wireless connectivity:
When the telecoil program is active, the remote control
may cause a pulsing noise.
Use the remote control with a distance greater than 4
X
inches (10 cm).

Audio input (FM system)

With an audio input you can connect your hearing aids to an
FM system. An FM system consists of a transmitter and a receiver.
It gathers speech at the voice source (via a separate microphone)
and transmits the sound directly to the hearing aids.
The signal is clearer and unaffected by poor room acoustics.
This can be useful for adults in dif cult listening situations and
for children in classrooms.
Most FM systems allow for coupling with audio devices like an
MP3 player.
Notes:
• The battery compartment with audio input is available as an
accessory only for SA, P, and SP BTE hearing aids.
As an alternative, you can use an audio streaming device
(accessory) with a plug for FM receivers.
Ask your Hearing Care Specialist to configure your hearing
aids, for example:
• Adjust the mix of the audio input signal with surrounding sounds.
22