DFT-6101 Battery Resistance Tester Instruction Manual Chapter 1 Overview 1.1. Purpose The battery Resistance Tester adopts the most advanced AC discharge test method, which can accurately test the voltage and internal resistance at both ends of the battery, and then judge the advantages and disadvantages of the battery capacity and technical status.
DFT-6101 Battery Resistance Tester Instruction Manual hazards. (5) The tester itself can store a large amount of test data, and can be conclusive query and analysis on the tester, and the battery test data can also be exported to the computer software with a U disk to generate charts and curves for analysis.
DFT-6101 Battery Resistance Tester Instruction Manual 1.5. Function Item Description The internal resistance Test and performance evaluation of single cell batteries, String Battery Test batteries, batteries + connection resistance (optional) Data Open and play back the data records, dump the U-disk, delete and other operations, and management format the data records at the same time.
DFT-6101 Battery Resistance Tester Instruction Manual Chapter 2 Operation instructions 2.1. The Tester Power on/off There is a power switch on the left side of the tester, dial the upper end to Power and the down end to Power off. Refer to Boot the main menu as follows:: The main menu consists of three parts: upper, middle and lower.
DFT-6101 Battery Resistance Tester Instruction Manual Setting interface Testing interface End interface 2.2.1 (Optional): Test instructions with connection resistors (same Test in Strings) 3-wire & 3-clamp simultaneous Test. The red clamp is connected to the connection resistor, the red and black...
DFT-6101 Battery Resistance Tester Instruction Manual 2.3.1 Custom standard parameters Click the "Unit" button on the right side of "Battery Voltage", pop up the custom parameter dialog window, set the custom parameters, click "Save". After saving, you can see that the "V" of the button changes to "Custom x", indicating that the customization was successful.
DFT-6101 Battery Resistance Tester Instruction Manual Data management interface Open recording interface Data test with resistance connection 2.5. Clock settings When operating by using the touch screen, you can tap the input or key directly, and the input number can be achieved by scrolling up and down.
DFT-6101 Battery Resistance Tester Instruction Manual 2.6.1 File management The tester can upgrade the system software through the U-disk, first put the upgraded software image file into the U disk, Power Off; then connect the U-disk and the tester through the OTG cable, press back key to boot and Power-on, and then wait for the upgrading, the interface prompts the upgrade progress, and automatically starts to the running interface after the upgrade is successful.
DFT-6101 Battery Resistance Tester Instruction Manual 2.6.4 Software Version information Double-click the "Version Info" menu item under the system management menu page to view the teetered system software version and Tester series number (S/N), as shown in the figure:...
DFT-6101 Battery Resistance Tester Instruction Manual Chapter 3 Tester Main Parts Structure 3.1. Package List Battery Resistance Tester DFT-6101 Host Test clamp (or Probe) 1kit 1kit Host Charger U-disk Data line User manual Packing list 3.2. DFT-6101 Host The host is used for field testing by operation, calculation, test results display, Storage and other use. (Quantity: 1...
DFT-6101 Battery Resistance Tester Instruction Manual 3.3 Testing Line Testing Line is either-or of Testing Line clamp or Testing Line probe 3.4 Host Charger . (Quantity: 1pc) Host Charger is for Host inside battery charging...
DFT-6101 Battery Resistance Tester Instruction Manual 3.5 Data Line Data Line is for data communication from host to PC by U-disk. 3.6 Box Used to pack the main host and accessories. (Quantity: 1pcs)
DFT-6101 Battery Resistance Tester Instruction Manual Chapter 4 Tester storage instructions 4.1. Tester with FLASH chip to store data including boot screen data. Test data, etc : 4.2. There are several types of tester data: 1) Boot screen data: Logpic.BMP. (Length X width 272X480).
DFT-6101 Battery Resistance Tester Instruction Manual Chapter 5 Routine maintenance 5.1. Cleaning maintenance (1) Cleaning and maintenance of the host Wash the main unit with a soft damp cloth and a mild detergent. Please do not use abrasive type. Dissolving cleaners or alcohol, etc., so as not to scratch the host panel or damage the text on the host.
Page 17
DFT-6101 Battery Resistance Tester Instruction Manual Battery Data Management PC Software Manual THOMSON TECH CO LTD...
Page 18
DFT-6101 Battery Resistance Tester Instruction Manual Table of Contents Chapter 1 Software Installation & Uninstallation .................. 18 1.1. Software runtime environment ........................18 1.2. Software installation ............................18 1.3. Software uninstallation ..........................18 1.4. Software running............................18 1.5. Main Menu ..............................19 Chapter 2 Data viewing and exporting to reports ................... 20 2.1.
DFT-6101 Battery Resistance Tester Instruction Manual Chapter 1 Software Installation & Uninstallation 1.1. Software runtime environment Operating System: Windows XP. Windows7. Windows10 CPU: P42.0GHz or above, Intel dual-core 2.0G is recommended Memory: DDR 32G or above Hard Disk: The installation disk has at least 300M of space Display resolution: 1024×...
DFT-6101 Battery Resistance Tester Instruction Manual Chapter 2 Data viewing and exporting to reports 2.1. Data Logger monitoring For the monitoring of the battery Data Logger, the Site must be added before monitoring, and the establishment process is shown in the following figure:...
DFT-6101 Battery Resistance Tester Instruction Manual Select the sample data you want to view, click View details, or double click the data you want to view, the interface pops up as below screenshot shown: 2.2. Data viewing and importing old report...
DFT-6101 Battery Resistance Tester Instruction Manual After clicking the Save button, you can see the actual data list, as shown in the following figure: 2.3. Export result to the report Click the Save Report button in the lower right corner, as shown below: You can see the data report in excel or RTF format.
DFT-6101 Battery Resistance Tester Instruction Manual Exit the software Click Close Report to exit the data report. Click Close Recording to close the Data Logging page. Click Exit System to close the software.