Power Connector - HP 15 Maintenance And Service Manual

Power connector

Table 5-15 Power connector description and part number
Description
Power connector for use in models with an Intel Core or Pentium Gold 4417U or 5405U processor
Power connector for use in models with a Pentium N5000 or Celeron N4000 processor
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the display assembly (see
Remove the power connector cable:
1. Disconnect the cable from the system board (1).
2. Remove the cable from the routing channel in the left speaker (2), and then remove the cable from the
computer (3).
Reverse this procedure to install the power connector cable.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 30).
Display assembly on page
27).
28).
50).
Component replacement procedures
Spare part number
806746-001
810327-004
59