HP 15 Maintenance And Service Manual page 65

c. Peel the cable from the inside of the display back cover (4), and then remove the cable (5).
The display cable is available as the following spare part numbers:
L63613-001: Touch displays for use in models with an Intel Core or Pentium Gold 4417U or 5405U
processor
L63614-001: Touch displays for use in on models with a Pentium N5000 or Celeron N4000
processor
L63615-001: Non-touch displays for use in models with an Intel Core or Pentium Gold 4417U or
5405U processor
L63616-001: Non-touch displays for use in models with a Pentium N5000 or Celeron N4000
processor
d. When installing the display cable, position the cable in the middle of the alignment notch as
marked on the inside of the display back cover.
11. If it is necessary to remove the wireless antennas:
Component replacement procedures 57