HP 15 Maintenance And Service Manual page 64

a. Remove the three Phillips M2.5 × 3.0 screws (1) from the bottom of each hinge.
b. Remove the Phillips M2.0 × 2.5 screw (2) from the top of each hinge.
c. Remove the display hinges from the display back cover (3).
The display hinges are available as spare part number L63612-001.
10. If it is necessary to remove the display panel cable:
a. Remove the tape from the connector on the webcam module (1), and then disconnect the cable
from the webcam module (2).
b. Remove the cable from the channel at the top of the display back cover (3).
56 Chapter 5 Removal and replacement procedures for authorized service provider parts