HP 15 Maintenance And Service Manual page 60

b. Release the top edge of the display bezel (1) from the display assembly.
IMPORTANT:
Follow the specific bezel removal procedures to avoid damaging the tape that secures the bottom
of the bezel to the display.
c. Release the left and right edges of the display bezel (2) from the display assembly.
d. Using a flat-plastic lifter tool, release the bottom left and right corners of the display bezel (3)
from the display assembly.
e. Insert a tool into the right side of the inside-bottom of the bezel, and then pull the tool to the left
carefully to separate the bezel adhesive from the panel (4).
f. Remove the display bezel from the display (5).
The display bezel is available as spare part number L63608-001.
7. If it is necessary to remove the webcam module:
52 Chapter 5 Removal and replacement procedures for authorized service provider parts
Be careful not to bend or break the narrow sections of the bezel when removing.