Usb Board - HP 15 Maintenance And Service Manual

USB board

Table 5-7 USB board description and part number
Description
USB board
NOTE: The USB board spare part kit does not include the cable. The cable is available as spare part
number L63581-001 for models without Pentium N5000 and Celeron N4000 processors and
L63582-001 for models with Pentium N5000 and Celeron N4000 processors.
Before removing the USB board, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the USB board:
1. Disconnect the cable from the ZIF connector on the USB board (1).
2. Remove the two Phillips M2.0 × 3.0 screws (2) that secure the USB board to the computer, and then
remove the board (3).
Reverse this procedure to install the USB board.
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
(Preparation for disassembly on page
Bottom cover on page
Battery on page 30).
27).
28).
Spare part number
L63580-001