Solid-State Drive - HP 15 Maintenance And Service Manual

Solid-state drive

Table 5-4 Solid-state drive descriptions and part numbers
Description
512 GB, PCIe, TLC
512 GB, PCIe, value
256 GB, PCIe, value
256 GB, PCIe + 16 GB Optane memory module
128 GB, SATA-3, TLC
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the solid-state drive:
Remove the Phillips M2.0 × 2.0 screw (1), and then pull the drive from the socket (2).
▲
Reverse this procedure to install the solid-state drive.
(Preparation for disassembly on page
Bottom cover on page
Battery on page 30).
27).
28).
Component replacement procedures
Spare part number
L63572-001
L63573-001
L63571-001
L69125-001
L63570-001
33