Related Manuals for Comtrend Corporation GS-7405
Summary of Contents for Comtrend Corporation GS-7405
- Page 1 Quick Installation Guide GS-7405 | 5-Port Gigabit Ethernet Smart-Lite Switch Product Information I-1. Package Contents GS-7405 Switch Power Cable 4 x Foot Pads...
- Page 2 I-2. Hardware Overview Front Panel The front panel of the switch consists of: A Series of LED Indicators Rear Panel The rear panel of the switch consists of: 5 x 10/100/1000Mbps RJ-45 Ports AC Power Connector (DC IN 5V / 1A) ...
- Page 3 I-3. LED Indicator PWR: Mode LED Status Description Green Power on Power off or fail Link/ACT: LED Status Mode Description 1000Mbps Green On/Blinking connected/data transmitting 10/100Mbps Amber On/Blinking connected/data transmitting Disconnected or fail I-4. Desktop Installation Install the switch on a desktop by attaching the cushioning rubber feet to the bottom corners of the switch to protect against external vibration.
-
Page 4: Quick Setup
Quick Setup II-1. Switch to End Device 1. Connect the switch to local power with the included power cable. 2. Use a standard Cat 5/5e Ethernet cable to connect the switch to end devices as shown below. Switch ports will automatically adjust to the link rate of the device to which it’s connected. - Page 5 You will be prompted for a username and password. Enter the default username “admin” and the default password “admin”. 3. You will arrive at the switch configuration window as shown below:...
- Page 6 Your Device is Now Connected! FOR MORE HELP: For instructions on advanced features, FAQ, etc., please visit our online Product Webpage. For more information: YouTube: https://www.youtube.com/user/ComtrendConnection Facebook: https://facebook.com/Comtrend Website: http://us.comtrend.com/ Support: Visit our website or call 1-877-COMTREND (1-877-266-8736)
- Page 7 Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
-
Page 8: Supplier's Declaration Of Conformity
Supplier’s Declaration of Conformity Company: Comtrend Corporation - North America Address: 14 Chrysler, Irvine, CA, 92618 Certify and declare under our responsibility that the following equipment: Product Name: 5-Port Gigabit Ethernet Smart-Lite Switch Model Name: GS-7405 Brand Name: COMTREND Is tested with the declaration described above, and is in conformity with the relevant FCC (Federal...