Power Connector (Dc In) Cable - HP Chromebook 14a Maintenance And Service Manual

4. When installing a system board, make sure the thermal pad is installed as shown in the following
illustration.
Reverse this procedure to install the system board.

Power connector (DC in) cable

To remove the power connector cable, use these procedures and illustrations.
Table 5-8 Power connector cable descriptions and part numbers
Description
Power connector cable
Before removing the power connector cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the system board (see
Remove the power connector cable:
Disconnect the power connector cable from the system board.
▲
38 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 28).
System board on page
26).
34).
Spare part number
L99191-001
26).