Touchpad - HP Chromebook 11a Maintenance And Service Manual

Table 5-6 Touchpad cable description and part number
Description
Touchpad cable
Before removing the touchpad cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad cable:
1. Release the ZIF connector (1) to which the touchpad cable is connected, and then disconnect the touchpad
cable from the system board.
2. Release the ZIF connector (2) to which the touchpad cable is connected, and then disconnect the touchpad
cable from the touchpad.
3. Detach the touchpad cable (3) from the top/keyboard. (The touchpad cable is attached to the top cover/
keyboard with double-sided adhesive.)
4. Remove the touchpad cable (4).
Reverse this procedure to install the touchpad cable.

Touchpad

To remove the touchpad, use this procedure and illustration.
34 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 23).
21).
Spare part number
M97111-001
21).