Solid-State Drive Specifications (Sata-3) - HP 15-ew0 Series Maintenance And Service Manual

Table 9-3 Solid-state drive specifications (continued)
Weight
Interface type
Ready time, maximum (to not busy)
Access times, logical
Transfer rate
Sequential read
Random read
Sequential write
Random write
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual
drive specifications may differ slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.

Solid-state drive specifications (SATA-3)

This section provides specifications for your solid-state drive.
Table 9-4 Solid-state drive specifications
Dimensions
Height
Weight
Interface type
Ready time, maximum (to not busy)
Access times, logical
Transfer rate
Total logical sectors
Operating temperature
*1 GB = 1 billion bytes when referring to hard drive storage capacity. Actual accessible capacity is less. Actual drive specifications can differ
slightly.
NOTE: Certain restrictions and exclusions apply. Contact support for details.
256 GB* 512 GB*
< 10 g < 10 g
PCIe PCIe
1.0 ms < 1.0 ms
0.1 ms 0.1 ms
up to 2150 MB/s up to 2150 MB/s
Up to 300,000 IOPs Up to 300,000 IOPs
up to 1550 MB/s up to 1550 MB/s
Up to 100,000 IOPs Up to 100,000 IOPs
468,883,296 1,000,215,216
0°C to 70°C (32°F to 158°F)
Solid-state drive specifications (SATA-3)
1 TB*
< 10 g
PCIe
1.0 ms
0.1 ms
up to 2150 MB/s
Up to 300,000 IOPs
up to 1550 MB/s
Up to 100,000 IOPs
1,500,336,388
128 GB*
1.35 mm
< 10 g
SATA-3
1.0 ms
0.1 ms
up to 540 MB/s
234,441,648
0°C to 70°C (32°F to 158°F)
79