Table of Contents
Advertisement
Your changes go into effect when the computer restarts.
Restoring factory settings in Computer Setup
To return all settings in Computer Setup to the values that were set at the factory, follow these steps.
NOTE:
Restoring defaults will not change the hard drive mode.
1.
Start Computer Setup. See
2.
Select Main, select Apply Factory Defaults and Exit, and then select Yes.
NOTE:
NOTE:
and Exit.
Your changes go into effect when the computer restarts.
NOTE:
Your password settings and security settings are not changed when you restore the factory settings.
Updating the BIOS
Updated versions of the BIOS might be available on the HP website. Most BIOS updates on the HP website are
packaged in compressed files called SoftPaqs.
Some download packages contain a file named Readme.txt, which contains information regarding installing and
troubleshooting the file.
Determining the BIOS version
To decide whether you need to update Computer Setup (BIOS), first determine the BIOS version on your
computer.
You can access BIOS version information (also known as ROM date and System BIOS) by pressing
are already in Windows) or by using Computer Setup.
1.
Start Computer Setup. See
2.
Select Main, and then select System Information.
3.
To exit Computer Setup menus without saving your changes, select Main, select Ignore Changes and Exit,
and then select Yes.
NOTE:
To check for later BIOS versions, see
Preparing for a BIOS update
Be sure to follow all prerequisites before downloading and installing a BIOS update.
IMPORTANT:
install a BIOS update only when the computer is connected to reliable external power using the AC adapter. Do
not download or install a BIOS update while the computer is running on battery power, docked in an optional
docking device, or connected to an optional power source. During the download and installation, follow these
instructions:
Using Computer Setup on page
If you are using arrow keys to highlight your choice, you must then press enter.
On select products, the selections might display Restore Defaults instead of Apply Factory Defaults
Using Computer Setup on page
If you are using arrow keys to highlight your choice, you must then press enter.
Preparing for a BIOS update on page
To reduce the risk of damage to the computer or an unsuccessful installation, download and
64.
64.
65.
Restoring factory settings in Computer Setup
fn+esc
(if you
65
Advertisement
Table of Contents
