Touchpad - HP 15-ew0 Series Maintenance And Service Manual

3. Detach the touchpad cable (3) from the top cover/keyboard. (The touchpad cable is attached to the top
cover/keyboard with double-sided adhesive.)
4. Remove the touchpad cable.
Reverse this procedure to install the touchpad cable.

Touchpad

To remove the touchpad, use this procedure and illustration.
Table 5-12 Touchpad descriptions and part numbers
Description
Touchpad:
NOTE: The touchpad spare part kit does not include the touchpad bracket or the touchpad cable. The touchpad bracket is not available as
a spare component. The touchpad cable is available using spare part number N09640-001
In natural silver finish
In nightfall black finish
Before removing the touchpad, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
4. Remove the touchpad cable (see
Remove the touchpad:
1. Release the black plastic film (1) that covers the touchpad screws.
Preparation for disassembly on page
Bottom cover on page
Battery on page 36).
Touchpad cable on page
34).
60).
Spare part number
N09642-001
N09641-001
34).
Touchpad 61