Touchpad Cable - HP 15-ew0 Series Maintenance And Service Manual

3. Remove the speakers (3) from the computer.
When removing the speakers, make note of the location of the two rubber isolator locations (4). The
absence of or damage to these isolators can result in degraded speaker performance.
Reverse this procedure to install the speakers.

Touchpad cable

To remove the touchpad cable, use this procedure and illustration.
Table 5-11 Touchpad cable description and part number
Description
Touchpad cable (includes double-sided adhesive)
Before removing the touchpad cable, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the touchpad cable:
1. Release the ZIF connector (1) to which the touchpad cable is connected, and then disconnect the touchpad
cable from the system board.
2. Release the ZIF connector (2) to which the touchpad cable is connected, and then disconnect the touchpad
cable from the touchpad.
60 Chapter 5 Removal and replacement procedures for authorized service provider parts
Preparation for disassembly on page
Bottom cover on page
Battery on page 36).
34).
Spare part number
N09640-001
34).