Speakers - HP 15-ew0 Series Maintenance And Service Manual

15. Slide the system board (5) up and to the left at an angle to remove it.
When removing the system board, be sure to take note of the location of the I/O bracket (6). This bracket
may become dislodged when the system board is removed.
Reverse this procedure to install the system board.

Speakers

To remove the speakers, use this procedure and illustration.
Table 5-10 Speakers description and part number
Description
Speakers (include cables, left and right speakers, and 2 rubber isolators)
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (see
2. Remove the bottom cover (see
3. Remove the battery (see
Remove the speakers:
1. Detach the speaker cable (1) from the touchpad bracket.
2. Remove the four Phillips M2.0 × 2.4 broad head screws (2) that secure the speakers to the computer.
Preparation for disassembly on page
Bottom cover on page
Battery on page 36).
34).
Spare part number
N09638-001
34).
Speakers 59